If you want a solution to Samsung J7 Pro (SM-J730) FRP Bypass then here you are in the right place, here I share a step by step tutorial that will help to unlock FRP from your phone very easily. FRP is a newly added security feature to modern-day Android phones, After the hard reset process, it will ask the user to put the last active Gmail account active in the phone to verify the real owner of the device. No doubt, it is one of the great features for Android to protect user data and phone. So follow the below process very carefully.
FRP mean factory Reset Protection and it added on Android 5.0, 6.0, 7.0, 8.0, 9.0, 10 version. FRP is automatically enabled when a user added a Google Account for the very time to their phone. Once it enabled then its protect the device from unauthorized access after the Factory reset.
After the factory reset process, you have to log in with the same Gmail account that you set up on your phone before the factory reset. In case, if you also forget the login ID and Password then Droidsolution.com give you a free safe solution to bypassing Google Account from your phone.
You can easily bypass Samsung J7 Pro FRP Unlock with these free FRP bypass tool and APK and follow the below guide carefully. so download the FRP Bypass APK from below and unlock your phone very easily within a seconds.
Disable the FRP protection is very easy just you have to go to settings ==>> Accounts ==>> Select the Gmail account that you want to remove =>> Select Remove Account. That’s it.
Download Samsung J7 Pro FRP File
This method is only available for Samsung J7 Pro, Only you need a good internet connection and download some FRP files.
File Name:-Samsung J7 Pro FRP File.zip
Size: 20MB
How to Flash: Instructions
Download: Mediafire Link
How To Install Samsung USB Driver:
- Open the USB Driver” folder, Run the “setup.exe”.
- Then hit Next =>Next=>Next=>>Agree=>> Install =>> Finish to install the Samsung USB driver to your computer properly.
- Done. now follow the FRP bypass process.
How to Bypass FRP Samsung J7 Pro
- Download all the required files from the above download links.
- First, extract the Combination Files
- Open the Odin tool folder and RUN Odin.exe
- Then click on the AP tab and select the Samsung SM-J730 Combination file, then click Open.
- Now put your device into the Samsung Download Mode.
- Power Off your Samsung J7 Pro
- Press & Hold Volume Down + Home + Power key together until you see the Warning screen on your device.
- Then release all keys, and press the Volume UP key once to confirm Download Mode.
- Now connect your Samsung phone to the computer.
- Go back to the Odin tool,
- Check, You will see your device has added.
- Now click on the Start button,
- The FRP Removing process has started.
- Wait for complete removal.
- Once you see the Pass message, disconnect, and power On your device.
- Pull down to get the Notification Bar and click Settings
- Go to About Device => Software Information => Tap build number 7times.
- Click Developer Options, and enable the USB debugging mode, and OEM unlock from there.
- Run the ADB FRP tool on your computer.
- Click any key to bypass the FRP lock.
- Now you have to Flash Stock Firmware.
- Download Samsung Firmware
- Extract the Firmware File.
- Run Odin Tool and Choose the Stock Firmware file.
- Click AP and choose the AP file from the Firmware folder.
- Click BL, CP, CSC, and choose their respective firmware files.
- Put your Samsung phone into the Download Mode again and connect your phone to the computer.
- Click the Start button on the Odin tool.
- It will take some time to complete the flash.
- Once you get the PASS message in the Odin tool, disconnect, and Power On your phone.
- That’s it.
