Oppo F11 USB Driver is a most useful file to update flashing or restore the phone using the Preloader CDC, USB, VCOM, port. This driver is a basic part to ensure the smooth connection between Windows computers to Oppo MediaTek MTK & Qualcomm powered phones. So, if you would like to download Oppo F11 USB Driver Autoinstaller package then you can download it from below & follow our steps to install it on any Windows 10, 8, 7, XP with the 32 & 64bit architecture versions.
If you have an Oppo F11 phone and wanted to connect it to the computer for Flashing firmware, file transferring, MTP, backup data, restore data, then install the Oppo F11 MediaTek MTK USB Driver on your computer to do it without facing any error.
Through this article, you will get the link to download Oppo F11 MTK Preloader CDC, USB, VCOM USB Driver latest setup and all other old versions. So, download the right one for your computer and follow our complete process on How to Install Oppo Preloader CDC, USB, VCOM Driver to connect the phone to the computer.
More: Download Oppo F7 USB Driver – Latest Official Driver
Download Oppo F11 MTK USB Driver
Oppo F11 drivers are specially designed for MediaTek smartphones. Only you need a good internet connection and download the following files to your computer.
File Name:-Oppo_F9_Driver.zip
Size: 20MB
How to Flash: Instructions
Pass: droidsolution.com
Download: Oppo MTK Driver
File Name:-Oppo_F9_Driver.zip
Size: 20MB
How to Flash: Instructions
Pass: droidsolution.com
Download: Oppo ADB Driver
How to Install Oppo F11 Driver
- First, Download the Oppo Driver setup to your computer and extract it.
- Choose the architecture version according to your PC version.
- Run the driver_install.exe.
- An installation Wizard will open: Click Next =>>
- Click Next
- Tap Install
- Again Click Next
- Install This Driver Software Anyway=> Two times
- Click Finish
- Now restart your computer=> OK
- Click Finish.
- That’s it.
- If you face the problem of The Third-Party INF Does Not Contain Digital Signature.
- Run Command Prompt (CMD) with Administrator Permission
- Now Copy and Paste the following code:
- bcdedit /set testsigning on
- Restart your computer
- Install the driver once again.
